Tiffany's - Not Just For Breakfast!

To begin this week I wanted to make something fun, so I chose to bake "Tiffany" blue colored cake pops. For an extra bit of color I made a deep pink strawberry cake for the inside. I love the way they turned out! The only challenge I faced was the consistency of the chocolate. It was too thick to smoothly coat the pops. After some research I found that Paramount Crystals will do a great job of thinning the chocolate, so I will buy some and try it for myself. I'll do another cake pop post once I have them and let you know the results! In the meantime, onto the "Tiffany" pops!

After baking a cake and letting it completely cool, it must be broken down into a sand-like texture. One way to do this is to cut the cake into fourths. Take two pieces at a time and "sand" the cake chunks by rubbing them together. The method I use is taking a fork and gently running it through the cake repeatedly until it turned into fine crumbs.

Next, add frosting. This is a tricky thing. If you add too much the cake does not stay put on the sticks while dipping into the chocolate. If you add too little, the cake will not form into balls and keep their shape. One tip I can share - ADD A LITTLE FROSTING AT A TIME! You can always add more, but you can not take excess frosting out. You may be surprised by the small amount of frosting that goes a long way. For approximately 3/4 of a cake I added about 2 large spoons full of frosting. It was plenty. After mixing (with a spoon to fully incorporate the cake and frosting) you should have a sticky, doughy result that can be shaped into balls.

Proceed to roll the mixture into balls. Some like to use a cake pop/cookie scoop for size consistency. I do it by hand and don't find have any issues. For now, that works just fine for me. Once the ball is rolled place it on a cookie sheet. Repeat until you have used all of the cake/frosting mixture.

Next, you will do one of two things. You can either place the cookie sheet in the refrigerator for a few hours, or in the freezer for 5-10 minutes. I can be at times impatient, so I use the freezer method. Beware, however, if the balls are too cold when you dip them, the chocolate coating will crack. It's a fine balance that you will work out through practice, trial and error.

While the chilling is happening, begin the chocolate melting process. I used Wilton chocolate melting discs. You can also use white chocolate bark, and I will be investigating Ghiradelli melting chocolate, which I have read tastes GREAT and has a nice sheen to it. I have many bags of the Wilton chocolate, however, and until it's used up will not be purchasing any more! Okay, so now melting the chocolate (I use the microwave method. An alternative is to use a double boiler):

Pour the chocolate melting chips into a microwavable bowl. Heat at 30 second increments on power setting 2

Stir the chocolate at each 30 second interval. It will appear lumpy and seem like it will never be smooth, but have faith and continue heating!

Finally, smooth, melted chocolate.

Now it's time to add the color. When dyeing chocolate, you MUST use candy dye. Using icing colors will not work, it will cause oil separation and ruin the chocolate. I used Wilton Candy Dye. You can purchase it at craft stores, such as Michael's.

To achieve that classic Tiffany Blue color, add small amount of the blue candy color to white chocolate. Since it was my first time and I was nervous about adding too much blue, I used a toothpick to add the coloring. Once again, you have to just kind of use trial and error to get the color right. Also, again, you can add more coloring, but you can't remove it once it's once it been mixed! Eventually, I achieved the right hue. Be sure to time the melting and coloring of the chocolate so it will be complete at the same time your cake balls are finished chilling. Remove them from the refrigerator or freezer and get your lollipop sticks (can be purchased at a craft store, such as Michael's) ready - it's time to dip!

Every girl's favorite shade of blue!

Unfortunately, with only two hands (and both were busy dipping), I could not photograph the process of making cake pops, so I'll have to describe the last few steps. First, take a lollipop stick and dip about an inch and a half into the chocolate. Insert the stick inside a cake ball approximately 3/4 of the way up. Next, dip the cake ball into the chocolate and make sure the entire ball is covered and the bottom is sealed with chocolate. If you don't seal the entire ball the cake will ooze out. Once you've gotten reached this point in the time consuming process, you don't want small openings in the chocolate  to ruin your pop! Once the pop is coated, let the chocolate set by placing the it into a piece of styrofoam to keep it upright (pre-poke holes in the styrofoam before dipping into the chocolate). Here is an example of "setting" cake pops:

And there you have your cake pops! Here is a finished Tiffany pop. I love it:

Add a plastic wrapper with some ribbon and you have a beautiful party favor, dessert offering, or snack!

They are quite time consuming, but worth it. If you have a few hours you can set aside, try making cake pops yourself and enjoy!!

P.S. Tiffany did not compensate me for this mention. I just LOVE everything Tiffany!  Who doesn't?  :)

I shared this recipe on:  Things that make you say Mmmmm....Monday

Recipe Roundup