Custom Made Fondant Princess Crown Cupcake Toppers

I'm back!  I'm back!!  I'm back!!!

After a year and a half absence, I don't know who, if anyone, is reading this, but I'm so happy to be posting an entry once again.  I've missed this so much.

A lot of happened since I last blogged on Life Is Sweets.  Shortly after my last post, my husband was in a pretty bad car accident with a fairly long recovery.  He did remarkably well and has returned to work and a normal life with, really, no lasting effects or troubles.  We are so thankful.  We also took a bit of time for traveling, moved into a new house, and, finally, have a new routine that has allowed me to get back to what I love - baking and creating in the kitchen!

Okay, so let's get to it.  One of my favorite four year old girls was having a birthday party to celebrate and the theme was "Ariel" and princesses.  I wanted to create something to incorporate both elements, while at the same time not obligating me to tackle the actual making of Ariel, which I accept is outside of my current skill set!

I'm pretty new to the fondant game, but it's more fun to work with than I expected and I'd like to do more with it.  I have done some fondant projects in the past, such as these cow cupcakes, but I've held onto to this idea that everything on a cupcake should not only be edible, it should be tasty and delicious.  If you have to peel off or remove items, what's the point?  Well, maybe just being pretty is point enough!  With all that said, here's how I made these cute princess crown toppers.

To begin, I rolled out some waxed paper and used painters tape to secure it.    You will be working with a smallish amount of fondant, so if you don't have tape, use a generous piece of waxed paper and anchor it with heavy objects at either end for stability.  That will work just fine.

I purchased a crown cookie cutter measuring approximately one inch tall.  I bought Wilton branad pre-made fondant at Michaels craft store in hot pink and and rolled it out in a fairly thick layer, keeping mind I wanted to insert a toothpick through the bottom.  Next, I began to cut out the crown shapes.  (To prevent the fondant from drying out, keep what you are not using wrapped in plastic so it will remain pliable.)

I worked on about 4-5 crowns at a time.  Once they were cut out, I inserted the toothpick.

If the toothpick is showing through the backside of the crown, "patch" it with a very small amount of fondant flattened with your fingers.  Gently spread it on the exposed area to create a seal.  If the crowns have already begun to dry and the fondant does not stick, use a very small amount of water to permanently secure it.

I wanted to give some visual interest to the crowns and decided to add some "pearls" to the tips.  I thought Wilton Pearlized Sprinkles would be perfect for this.  Since the fondant I chose was pink, I went with white sprinkles.

Cute!  Yet...I thought something more was needed.  I set the crowns and a layer of paper towel (to absorb moisture and leave them nice and stiff) and moved on to something else.

Then it came to me!  Ages ago I purchased a cookie stamper set with tiny little letters.  How cute would they look on the crowns?  I chose my friend's first name initial, "K".

Adorable!!  I was very pleased.  Very simple with clean lines and a splash of "bling".

The next day, however, I still had these crowns on my mind.  While shopping for supplies, I didn't really know where I was going with this, so I purchased some plastic crown rings to put on the top of the cupcakes as toppers in case my ideas didn't work out.  I REALLY hoped not to use them and was glad I didn't have to for that purpose.  BUT, I had some inspiration about using them as stampers on the fondants.  Would that be effective to create more of a "crown" effect?

I lined a ring up and rolled it back and forth, pressing firmly but not so firm as to flatten or distort the shape.

Voila!

I stamped a "K" in the middle of the heart.

Perfect!  Would some "pearls" be too much?  Of course not!

To secure the sprinkles, press one into each point of the crown making sure there is a semi-circular indent for the sprinkle to rest in.

Using a small paintbrush (that's never been used for painting - I have a supply reserved for food projects only), apply a trace amount of water in each indent and them apply the sprinkle.  Once dried, the sprinkle should be totally secured to the fondant.

Here is the progression of the crowns as I made them.  I loved the final version with the ring impression so much I redid all of the crowns for the birthday party cupcakes.

Now, to take a plain frosted cupcake and transform it into something fit for a Princess on her birthday!

I found these adorable castle cupcake wrappers and knew I wanted to use them, too, for the final product.

All done!

But then again...what about some sparkles by adding a layer of edible disco dust?

Or maybe securing an edible sugar heart in the middle of the crown.  Perhaps a fun jewel sticker for some sparkle?  The possibilities are endless!  Color combinations and and array of sprinkles, quins, edible glitter, stamps, etc., will allow you to make your own specialized cupcake topper for the Princesses in your life!

Stay tuned for the second part of this particular party...Mermaid Tail Cupcakes!  I will post a tutorial detailing the steps to make these cutie cupcakes.  Thanks for stopping by Life Is Sweets!!

Frog and Lamb Cupcakes

Just before leaving for our trip to India, my family celebrated my twin nieces 5th birthday.  Since they were very small, Abigail has loved frogs and Madeline loves her lambs.  So, I wanted to create fun birthday treats for them.  While browsing on Pinterest (if you haven't signed up for Pinterest yet, you should!  It's a virtual pinboard filled with ideas and inspiration for just about anything you can think of!)

Many times on Pinterest you can find how-to's or recipes but in this instance, I had to work off the photos alone.  These did not appear to be too complicated so I gave them a go!

To begin, I made Funfetti cupcakes for the girls.  I baked them as directed.

While they were cooling, I started to make the froggy eyes and lamb heads.  The original picture of the frog eyes looked to be sliced marshmallows and chocolate chips.  I wanted a deeper black eye dot and cleaner circles, so I went with white chocolate wafers and black cake gel.    I used the flat part of the chocolate wafer to add the black dot, as you can see in the photo below.  While the gel was setting I started working with pre-made black fondant, which I purchased at Michaels craft store.  This was my first time working with fondant, and I didn't see a need to try making homemade since no one eats it anyway.  At least no one I know does.  So, bought it and was surprised at how it had a liquidy film around it and how and messy it was!  At first I assumed it was a bad batch, or too old, or something wrong.  However, as I worked it all together with my hands it became firmer and drier.  Once this was done I made nice round ball shapes and flattened them out  to add the eyes, as in the photo below:

Once I was done I referenced the lamb cupcake picture I was working from and saw that a flattened ball was completely the wrong shape!  I needed to make a much smaller OVAL shape and add tiny ears, as in the photo below:

I never follow the first rule in baking....ALWAYS read the entire recipe first (or in this case, double check the photo you are following).  Save yourself the trouble and wasted time!  I share this mistake of mine with you as a cautionary tale!

Once the lamb heads were done, I melted some white chocolate in a squeeze bottle.  I wanted to add small white dots to make eyes on the fondant shapes.  Be warned that if you try to do this immediately after melting the chocolate it will be extremely runny and you will not have control over how much comes out.  A mess will ensue.  Again, a firsthand cautionary tale.

To finish the eyes, I used the same black gel I used for the frog eyes to dot the white chocolate.  Then, I took the top of the chocolate squeeze bottle (after removing it from the bottle and rinsing the chocolate off) to make two indents for a nose shape.

I mixed up two batches of buttercream icing.  From the first batch I put aside a few spoonfuls to dye red for the frog mouth.  I dyed the remaining icing a deep green.  Just green alone wasn't achieving the shade I wanted, so I added a small bit of blue and then red to the green.  I don't know the exact number of drops I used, I just played around with it until I was happy.  It's important to add one drop at a time, though, so you don't overdo it and ruin the icing color.

Next, I iced the frog cupcakes, trying to make them as smooth as possible.  I took the spoonfuls of icing I set aside and added red gel.  After placing the eyes on the cupcakes, I used a ziploc bag with a corner snipped off to pipe the smile on. They looked adorable!

As for the lamb cupcakes, I filled a piping bag with buttercream icing and used a #4 piping tip, lifting up and down repeatedly on the top of the cupcake to create a "fluffy" effect.  I added the pre-made fondant heads to the iced cupcakes, placing them at a small angle, finishing off by piping a bit more fluff on the top of the head.

The girls and party guests loved them!  Yes, they were cute, but they were also DELICIOUS!

Happy Birthday to two of my favorite girls!!

I have shared this recipe with A Little Nosh for Tastetastic Thursday, a linky party.
It's a great site, head over there to check it out for some great ideas and inspiration!

Chocolate Covered Oreo Cookies

As I mentioned in my previous chocolate molding post, I also bought a chocolate mold specifically for covering Oreo cookies (the molds will be labeled as such, so you can be sure they will be deep enough to cover the Oreos completely).  Once again, I will say I need to do a bit more research regarding melting and molding chocolate.  This mold, like the dice mold I used prior, had a raised design surface.

I wanted to paint an outline of the glass with white and then "fill" the glass with pink to mimic a cosmopolitan.  Had I chosen a simple design and used only one color of chocolate to start, I believe I would have been more successful.  The extra step of staging colors and/or painting part of the mold is a whole other ballgame.  It requires a steady hand and precision, which, I must admit, I lack.  Here is an example of my difficulty with staying in the lines:

Perhaps if I had painting experience or had any artistic ability this would have come more naturally to me.  Maybe, but I am going to go with the-chocolate-was-too-thick excuse (actually it was!).  My next idea was to color the martini glass in all pink.  This was easier, but not without error.  I used a toothpick to trim the glass edges and hoped for the best.  They turned out better:

Finally, after the chocolate has set and you ease them out of the mold and it's finally time to take a bite, it's all worth the effort!:

You can never go wrong with an Oreo cookie and smothering them in chocolate seems like the right thing to do.  :)  I recommend trying this, they would make a great snack, dessert, or party favors.  You can put them on sticks and make chocolate covered Oreo lollipops (just make sure to use Double Stuff Oreos in place of the regular cookies).  Happy Molding!!

Tiffany's - Not Just For Breakfast!

To begin this week I wanted to make something fun, so I chose to bake "Tiffany" blue colored cake pops. For an extra bit of color I made a deep pink strawberry cake for the inside. I love the way they turned out! The only challenge I faced was the consistency of the chocolate. It was too thick to smoothly coat the pops. After some research I found that Paramount Crystals will do a great job of thinning the chocolate, so I will buy some and try it for myself. I'll do another cake pop post once I have them and let you know the results! In the meantime, onto the "Tiffany" pops!

After baking a cake and letting it completely cool, it must be broken down into a sand-like texture. One way to do this is to cut the cake into fourths. Take two pieces at a time and "sand" the cake chunks by rubbing them together. The method I use is taking a fork and gently running it through the cake repeatedly until it turned into fine crumbs.

Next, add frosting. This is a tricky thing. If you add too much the cake does not stay put on the sticks while dipping into the chocolate. If you add too little, the cake will not form into balls and keep their shape. One tip I can share - ADD A LITTLE FROSTING AT A TIME! You can always add more, but you can not take excess frosting out. You may be surprised by the small amount of frosting that goes a long way. For approximately 3/4 of a cake I added about 2 large spoons full of frosting. It was plenty. After mixing (with a spoon to fully incorporate the cake and frosting) you should have a sticky, doughy result that can be shaped into balls.

Proceed to roll the mixture into balls. Some like to use a cake pop/cookie scoop for size consistency. I do it by hand and don't find have any issues. For now, that works just fine for me. Once the ball is rolled place it on a cookie sheet. Repeat until you have used all of the cake/frosting mixture.

Next, you will do one of two things. You can either place the cookie sheet in the refrigerator for a few hours, or in the freezer for 5-10 minutes. I can be at times impatient, so I use the freezer method. Beware, however, if the balls are too cold when you dip them, the chocolate coating will crack. It's a fine balance that you will work out through practice, trial and error.

While the chilling is happening, begin the chocolate melting process. I used Wilton chocolate melting discs. You can also use white chocolate bark, and I will be investigating Ghiradelli melting chocolate, which I have read tastes GREAT and has a nice sheen to it. I have many bags of the Wilton chocolate, however, and until it's used up will not be purchasing any more! Okay, so now melting the chocolate (I use the microwave method. An alternative is to use a double boiler):

Pour the chocolate melting chips into a microwavable bowl. Heat at 30 second increments on power setting 2

Stir the chocolate at each 30 second interval. It will appear lumpy and seem like it will never be smooth, but have faith and continue heating!

Finally, smooth, melted chocolate.

Now it's time to add the color. When dyeing chocolate, you MUST use candy dye. Using icing colors will not work, it will cause oil separation and ruin the chocolate. I used Wilton Candy Dye. You can purchase it at craft stores, such as Michael's.

To achieve that classic Tiffany Blue color, add small amount of the blue candy color to white chocolate. Since it was my first time and I was nervous about adding too much blue, I used a toothpick to add the coloring. Once again, you have to just kind of use trial and error to get the color right. Also, again, you can add more coloring, but you can't remove it once it's once it been mixed! Eventually, I achieved the right hue. Be sure to time the melting and coloring of the chocolate so it will be complete at the same time your cake balls are finished chilling. Remove them from the refrigerator or freezer and get your lollipop sticks (can be purchased at a craft store, such as Michael's) ready - it's time to dip!

Every girl's favorite shade of blue!

Unfortunately, with only two hands (and both were busy dipping), I could not photograph the process of making cake pops, so I'll have to describe the last few steps. First, take a lollipop stick and dip about an inch and a half into the chocolate. Insert the stick inside a cake ball approximately 3/4 of the way up. Next, dip the cake ball into the chocolate and make sure the entire ball is covered and the bottom is sealed with chocolate. If you don't seal the entire ball the cake will ooze out. Once you've gotten reached this point in the time consuming process, you don't want small openings in the chocolate  to ruin your pop! Once the pop is coated, let the chocolate set by placing the it into a piece of styrofoam to keep it upright (pre-poke holes in the styrofoam before dipping into the chocolate). Here is an example of "setting" cake pops:

And there you have your cake pops! Here is a finished Tiffany pop. I love it:

Add a plastic wrapper with some ribbon and you have a beautiful party favor, dessert offering, or snack!

They are quite time consuming, but worth it. If you have a few hours you can set aside, try making cake pops yourself and enjoy!!

P.S. Tiffany did not compensate me for this mention. I just LOVE everything Tiffany!  Who doesn't?  :)

I shared this recipe on:  Things that make you say Mmmmm....Monday

Recipe Roundup